Control Units
C24.XOUT
C24.XOUT is a compact programmable CANbus ECU for mobile machinery and on-vehicle equipment. With 8 digital/analog inputs and 8 output channels, it provides centralized control of hydraulic valves, relays and sensors. CANopen and SAE J1939 support, dual-microcontroller architecture and EN ISO 13849-1 PL/d safety performance make it a reliable control solution for field conditions.
Key Specifications
- 8 inputs + 8 outputs, compact form factor
- Programmable embedded software
- CANopen and SAE J1939 communication support
- Cross-checked I/O via dual-microcontroller architecture
- Over-current, over-voltage and reverse polarity protection
- Internal watchdog safety relay
- Diagnostics and current feedback on all I/O
- EN ISO 13849-1 PL/d, CE and EMC compliant
- Configuration and firmware upload via Javelin Suite
Technical Details
C24.XOUT is a compact-class electronic control unit in the Avioni programmable ECU family. It is designed for sensor reading, output driving and CAN-based system integration in construction machinery, aerial platforms, cranes, concrete pumps and similar mobile equipment. Eight input and eight output channels provide the flexibility needed for mid-scale centralized control applications.
Input and Output Capabilities
C24.XOUT can be configured with the input and output types supported by the Avioni ECU platform. In addition to digital I/O, sensor interfaces such as analog voltage, current, frequency/RPM, resistance, encoder and duty cycle measurement, and actuator drive options such as PWM, ratiometric voltage and frequency output can be used according to project requirements. This allows field elements such as limit switches, pressure sensors, joystick signals or hydraulic proportional valves to be managed from a single unit.
Safety and Reliability
Like all Avioni master ECUs, C24.XOUT uses a dual-microcontroller architecture for cross-checking of input and output behavior. Over-current protection, over-voltage protection, reverse polarity protection and an internal watchdog safety relay are provided as standard. Diagnostics and current feedback on all inputs and outputs help detect conditions such as wire breaks, short circuits or faulty actuators at an early stage.
The unit is designed and tested to meet EN ISO 13849-1 at performance level PL/d. It carries CE marking and has been verified against the relevant standards under EMC Directive 2014/30/EU.
CANbus Communication
C24.XOUT features a CANbus interface supporting CANopen and SAE J1939 protocols. It can operate as master or slave in multiplex systems and can be integrated on the same network with other Avioni ECUs, HMI displays, sensor modules and third-party CAN devices. This reduces wiring complexity and simplifies system expansion.
Javelin Suite Integration
C24.XOUT is configured and commissioned with Avioni Javelin Suite engineering software. The following operations can be performed via Javelin Suite:
• Application software upload and updates (firmware)
• I/O mapping and parameter configuration
• System calibration and functional testing
• Live CAN data monitoring and debugging
• Reading fault codes and diagnostic information
• Project file management and field configuration
With UCAN-USB or UCAN-BT adapters, Javelin Suite provides wired or wireless access in workshop and field environments.
Typical Applications
• Mobile crane and aerial platform control systems
• Hydraulic valve and relay drive applications
• Limit switch and sensor aggregation
• CAN-based multiplex machine architectures
• Prototype development and series production commissioning
C24.XOUT is the entry-level solution in the scalable Avioni control ecosystem, with a path to higher-channel C48 and C72 series ECUs when applications require more I/O.
Input and Output Capabilities
C24.XOUT can be configured with the input and output types supported by the Avioni ECU platform. In addition to digital I/O, sensor interfaces such as analog voltage, current, frequency/RPM, resistance, encoder and duty cycle measurement, and actuator drive options such as PWM, ratiometric voltage and frequency output can be used according to project requirements. This allows field elements such as limit switches, pressure sensors, joystick signals or hydraulic proportional valves to be managed from a single unit.
Safety and Reliability
Like all Avioni master ECUs, C24.XOUT uses a dual-microcontroller architecture for cross-checking of input and output behavior. Over-current protection, over-voltage protection, reverse polarity protection and an internal watchdog safety relay are provided as standard. Diagnostics and current feedback on all inputs and outputs help detect conditions such as wire breaks, short circuits or faulty actuators at an early stage.
The unit is designed and tested to meet EN ISO 13849-1 at performance level PL/d. It carries CE marking and has been verified against the relevant standards under EMC Directive 2014/30/EU.
CANbus Communication
C24.XOUT features a CANbus interface supporting CANopen and SAE J1939 protocols. It can operate as master or slave in multiplex systems and can be integrated on the same network with other Avioni ECUs, HMI displays, sensor modules and third-party CAN devices. This reduces wiring complexity and simplifies system expansion.
Javelin Suite Integration
C24.XOUT is configured and commissioned with Avioni Javelin Suite engineering software. The following operations can be performed via Javelin Suite:
• Application software upload and updates (firmware)
• I/O mapping and parameter configuration
• System calibration and functional testing
• Live CAN data monitoring and debugging
• Reading fault codes and diagnostic information
• Project file management and field configuration
With UCAN-USB or UCAN-BT adapters, Javelin Suite provides wired or wireless access in workshop and field environments.
Typical Applications
• Mobile crane and aerial platform control systems
• Hydraulic valve and relay drive applications
• Limit switch and sensor aggregation
• CAN-based multiplex machine architectures
• Prototype development and series production commissioning
C24.XOUT is the entry-level solution in the scalable Avioni control ecosystem, with a path to higher-channel C48 and C72 series ECUs when applications require more I/O.