Programmable CANbus Controllers &
VCU (Vehicle Control Units)

All our electronic control units have double microcontroller in order to cross control of inputs and outputs behavior. As contemporary automotive standard, CANbus communication protocol is preffered. All AVIONI^® electronic units have one or more CAN-Bus (based on both CANopen & SAE/J1939) port regarding the vehicle's requirements. As well as current feedback, over-current protection, over-voltage protection, reverse polarity protection and diagnostics of all input & outputs, internal watchdog safety relay is a standard feature of our master control units.

Our Electronic Control Units are designed according to comply with EN ISO 13849-1 at PL/d

AVIONI^® ECUs have CE Marking and comply with the following standards according to the latest EMC directive 2014/30/EU:

• EN 55022:2010/AC:2011 (RF Emission)
• EN 55024:2010 (Electrostatic Discharge)
• EN 61000-4-2
• EN 61000-6-1
• EN 61000-6-3

Following INPUT and OUTPUT types can be processed by Our Electronic Control Units

• Input: High Side Digital (On/Off)
• Input: Low Side Digital (On/Off)
• Input: 0..5V
• Input: 0..30V
• Input: 0..20mA
• Input: Frequency/RPM (Hz)
• Input: Resistance (Ohm)
• Input: Quadrature Encoder
• Input: Duty Cycle Measurement (0..100%)


• Output: High Side Digital (On/Off)
• Output: Low Side Digital (On/Off)
• Output: High Side PWM
• Output: Low Side PWM
• Output: Ratiometric Voltage (0..30V)
• Output: Frequency Output (Hz)

For datasheets and more information please contact us.